P-267: 3-Stage Midwest Finishing Systems / Nordson Powder Coating System Design: 3’-0” W x 5’-0” H Opening, 3 FPM

P-267: 3-Stage Midwest Finishing Systems / Nordson Powder Coating System

Design: 3’-0” W x 5’-0” H Opening, 3 FPM

 

System Overview:

  • Opening Size: 36” wide x 60” high, 30” Conveyor Slot
  • Part Size: 24” wide x 72” long or 30” wide x 36” long x 54” high
  • Line Speed: 3 fpm (Variable 1-5 fpm), <200 lbs capacity, can be increased
  • System was installed new 2001 will end operation in April 2022
  • Very Nice system that can be easily moved and installed at your facility.
  • Location – TBD at time of Purchase
  • Item Listed on 03/27/2022

3-Stage Stainless Steel Pretreatment Washer System

  • 42’-0” long x 8’-4” wide x 11’-10” high
  • Carver Vertical Mount Pumps
  • Blow-Off System at Exit
  • Quick disconnect risers & quick-change nozzles,
  • Maxon 4” Tube-O-Therm Burner on Stage 1, 900,000 Btu / Hr, 1/2 HP
  • All Stainless Construction
  • Exhaust Fans – Entrance and Exit, 1,500 CFM, 3/4 HP ea
  • Independent Control Panel, 60 Amp Feed, 27.7 Amp Load
  • Wash Stages
    • Stage 1 –   100 Sec. Heated Cleaner / Coater, 7252 GPM, 1/2 HP
    • Stage 2 –   45 Sec.  Rinse, 126 GPM, 3 HP
    • Stage 3 –   60 Sec.  Seal/Rinse, 168 GPM, 5 HP

Dry Off Oven Specs

  • Dry-Off Oven Dim.: 25’-6” long x 8’-7” wide x 11’-0” high
  • Time Cycle (Dry-Off): 8 minutes @ 3 FPM @ <350° F
    • Ships assembled.
    • 6” Insulated Oven Wall & Roof Panels, 4” Thick Floor
    • Side-Mount Burner Box, 6,175 CFM, 7-1/2 HP Recirc Fan, Floor Duct
    • Maxon Burner – 500,000 Btu / Hr, 1/3 HP
    • Exhaust Fan – 545 CFM, 1/2 HP
    • Independent Control Panel, 30 Amp Feed, 9.4 Amp Load

Cure Oven Specs

  • Cure Oven Dim.: 39’-0” long x 9’-0” wide x 11’-0” high
  • Time Cycle (Cure):             20 minutes @ 3 FPM @ <400° F
    • Ships assembled.
    • 6” Insulated Oven Wall & Roof Panels, 4” Thick Floor
    • End-Mount Burner Box, 9,900 CFM, 7-1/2 HP Recirc Fan, Floor Duct
    • Maxon Burner – 500,000 Btu / Hr, 1/3 HP
    • Exhaust Fan – 300 CFM, 1/2 HP
    • Entrance Air Hood Fan
    • Independent Control Panel, 30 Amp Feed, 14.9 Amp Load
    • Oven can be added to for an increased line speed if needed.
  • Unibilt Conveyor System
    • 375’ of 3” Enclosed Track
    • H-attachments spaced 24” On Center
    • Conveyor drive w/ variable speed control
    • Chain Tensioner, Auto Take-up
    • Auto lubrication system
    • Floor-Mounted Conveyor Supports
  • Nordson Vantage RCM Powder Booth System
  • Type of System: Cartridge, Side-Draft, Reclaim or STW Powder Booth
    • Dimensions: 15′ L X 12′ W X 8’-6” H (Estimated)
    • (1) Booth Base
    • (1) Galvanized Steel Housing with Clear Poly Roof
    • (2) Manual Gun Spray Openings
    • (1) 8,000 CFM Fan Package and Collector
    • (1) Vibratory Box Feed Cart
    • (1) Encore Manual Powder Gun with Control
    • (1) Sure Coat Manual Powder Gun with Control
    • (1) Lot Air Hose, Powder Hose, Transfer Pumps and Accessories
    • (1) System Control Panel

The system may be modified to suit your needs. Installation services are available and may be quoted per customer request.

 

FOB:               Wisconsin depending on timing