P-267: 6-Stage Koch / Nordson Powder Coating System Design: 7’-0” W x 7’-0” H Opening

P-267: 6-Stage Koch / Nordson Powder Coating System

Design: 7’-0” W x 7’-0” H Opening

 

System Overview:

  • Opening Size: 7’-0” wide x 7’-0” high, can be modified
  • Part Size: 6’-0” wide x 6’-0” high x 12’-0 long as configured
  • Line Speed: 5 fpm (Variable 1-10 fpm), <3,000 lbs capacity, can be increased
  • Capacity: 18 Load Bars per Hour
  • System was installed new in 2008 and shut down in 2017
  • Excellent system that can be reconfigured as needed to suit your requirements
  • Location – USA
  • Item Listed on 10/23/2021

 

  • Koch 6-Stage Stainless Steel Pretreatment Washer& Water Treatment Systems
    • All Stainless-Steel Construction
    • Gusher Vertical Mount Pumps, SS Wetted
    • Quick disconnect risers & quick-change nozzles
    • Heated Stages on 1 & 4, Boiler Heat with Plate and Frame Heat Exchangers
    • All Stainless Construction
    • Exhaust Fans – Entrance and Exit
    • Air Force 1 Blow Off System
    • DMP Wastewater Treatment System
    • Reverse Osmosis Water System
    • Wash Stages
      • Stage 1 –   120 Sec. Acid Cleaner, Heated
      • Stage 2 –   60 Sec. Rinse
      • Stage 3 –   60 Sec. Rinse
      • Stage 4 –   120 Sec. Zinc Phosphate, Heated
      • Stage 5 –   60 Sec.  Rinse
      • Stage 6 –   60 Sec.  Seal

 

  • Koch Dry-Off Oven, Cure Oven and Cooling Tunnel

 

  • Cure Oven is Elevated, and Dry Off Oven is Floor Mounted
  • Time Cycle (Dry-Off): 10 minutes @ <250° F, single conveyor
  • Time Cycle (Cure): 73 minutes per lane @ <450° F, dual conveyor
  • 6” Insulated Oven Panels on Roof and Walls, 4” Floor panels.
  • (1 ea) Side-Mount Burner Box & Duct for Dry-Off Oven
  • (2 ea) Floor-Mount Burner Boxes & Duct for Cure Oven
  • All Structure, Flashing, and Duct Provided
  • Eclipse Burners & Honeywell Controls on Both Ovens
  • Air Force 1 Air Seals on each end of the Dry Off Oven
  • 47-Minute Cool Down Tunnel After Cure Oven
  • Oven Exhaust Fans for each oven.
  • Oven can be configured to new design as needed

 

  • Overhead Conveyor System
    • 444 X458 I-Beam Power and Free Conveyor System
    • 2 ea Lowerator Systems for Load/Unload
    • All Loadbars, Switches, Turns, Etc Included
    • Conveyor drives w/ variable speed control
    • Chain Tensioners
    • Auto lubrication system
    • Conveyor Supports

 

  • Nordson Powder Booth Systems

 

  • 1 EA – Nordson Vantage Spray to Waste Powder Booth System:
    • Manual Spray to Waste, Side-Draft Design for Quick Color Changes: with (2 ea) Encore Color On Demand Systems, (2 ea) Encore Manual Guns, (2) Vantage Lab/Paint Kitchen Booths, Control Panels and related equipment.

 

  • 1 EA – Nordson Colormax Automatic/Manual Powder System:
    • Cyclone, Side Draft Design for Quick Color Changes with (24 ea) Sure Coat Auto Guns with iControl, Paint Feed Center, (4 ea) Reciprocating Gun Movers, In/Out Positioning, Part Detection, Fire Detection System, Explosion Suppression System, Dual Dust Collectors, Cyclone, Control Panels, and related items

 

  • Powder Coat Clean / EV Room
    • 60’ wide x 100’ long x 20’-0” high – Estimated
    • 3” White, Insulated Panels
    • (2 ea) Access Doors & (1 ea) Overhead Door
    • HVAC System Included
    • Floor Mounted Support Structure

 

  • Control System
    • PLC control system with HMI.
    • All prints, programs, etc are included.

 

The system may be modified to suit your needs. Installation & Removal services are available and may be quoted per customer request.