EM-118 - 15-Stage TTX Monorail Cathodic E-Coat System

EM-118 – 15-Stage TTX Monorail Cathodic E-Coat System

 

Manufacturer:                                       TTX (Therma-Tron-X)

Paint Type:                                           Cathodic Epoxy

Ware Package Size:                              Sizes are listed per original print study. Possible to change

Size 1 – 3’-0” wide x 6’- 2” high x 1’- 3” long (can be longer)

Size 2 – 3’-0” wide x 5’-0” high x 9’- 2” long

Size 3 – 1’-8” wide x 5’-0” high x 12’- 3” long

 

Part Opening:                                       4’-0” wide x 7’- 0” high

Max Load Weight:                                <200 lbs, 60 lbs per foot as designed, (can be increased)

Line Speed:                                          10 FPM, Variable

Average Surface Area:                          160 Sq/Ft / Min

Film Thickness:                                    .6 – 1.0 mil

Year:                                                    2018

Item Listed On:                                    06/12/2026

 

System comes from The Crown Group / PPG. There were two systems we purchased and removed. Pictures shown may be from either system.

 

Description – A very well built and maintained TTX monorail cathodic e-coat system that is available immediately. System ran automotive parts and was shut down in 2025. The system has been removed and is located at our facility. An excellent system with great earning potential that will be perfect for small automative parts, castings, or any parts requiring a zinc phosphate e-coat process.

 

11-Stage Stainless Steel Pretreatment System

The pretreatment system design may be changed for your requirements:

  • (S1) Spray Cleaner, 60 Sec. @ <140℉
  • (S2) Immersion Cleaner, 120 Sec. @ <160℉
  • (S3) Spray Rinse, 30 Sec. @ Ambient
  • (S4) Immersion Rinse, 30 Sec. @ Ambient
  • (S5) Immersion Conditioner, 30 Sec. @ Ambient
  • (S6) Immersion Zinc Phosphate, 120 Sec. @ <140℉
  • (S7) Spray Rinse, 30 Sec. @ Ambient
  • (S8) Immersion Rinse, 30 Sec. @ Ambient
  • (S9) Immersion Two-Step, 60 Sec. @ Ambient
  • (S10) Spray Rinse, 30 Sec. @ Ambient
  • (S11) Immersion Rinse, 30 Sec. @ Ambient

 

4-Stage Cathodic E-Coat System

  • (S12) Cathodic E-Coat, 150 Sec. @ <90℉ +/-
  • (S13) Spray Post Rinse 1, 30 Sec. @ Ambient
  • (S14) Immersion Post Rinse 2, 30 Sec. @ Ambient
  • (S15) Spray Post Rinse 1, 30 Sec. @ Ambient

 

E-Coat & Pretreatment Components

  • Gusher Pumps. All are Stainless Steel Fitted or Wetted End
  • Bag Filter Vessels
  • Rite Boiler & Stainless Steel Plate & Frame Heat Exchangers for Heated Stages
  • Chiller System for E-coating
  • Reverse Osmosis Water System
  • 400 Volt, 500 Amp Controlled Power Rectifiers
  • Anode Flush System
  • Ultrafiltration System with CIP
  • Oberlin Filter for Zinc Phosphate
  • E-Coat Storage Tank with Transfer Pump
  • Paint Feed Pump Station
  • Anodes, Piping & wiring will need to replaced new (standard for rebuilt e-coat).
  • 40 GPM Waste Water Treatment System

 

Convection E-Coat Bake Oven

  • 40 Minute Bake Oven @ 10 fpm. The oven can be added to if required for additional time.
  • <425℉ Design
  • Elevated or Floor Mount Oven Design. Estimated Size – 29’ W x 110’ L x 13’ H
  • Natural Gas, Direct-Fired and Recirculating Design
  • Top or Floor Mounted Burner Box Design.
  • 6” Insulated Wall, Roof and 4” Floor Panels.
  • Oven Exhaust Fan
  • Access Platform
  • The oven will be shipped knocked down to include oven panels, flashing, and structure.

 

Conveyor System

  • X458, 4” I-Beam Conveyor System
  • 3 Drive System
  • Loadbars have Sanitary Hooks & Pans to prevent contamination.
  • (1) Lot Conveyor Turns, Drive, Take-Up and Oiler and components per installation.

 

Control System with all prints, programs provided as available.

 

Installation services are available and may be quoted per customer request.

Contact Nick @ 920-361-5208 x 2 or nick@americanindustrialsystems.com for more info or questions