ETTX-115 – 19-Stage Therma-Tron-X (TTX) SST Cathodic E-Coat System
Manufacturer: Therma-Tron-X (TTX)
Ware Package Size: 2’-6” wide x 3’-0” high x 5’- 0” long
Max Load Weight: 1,000 lbs (Parts/Racks), 20,000 lbs per hour
Load bars per hour: 20 each
Cycle Time: 3.0 Minutes
Immersion Time: 2.0 Minutes
Transfer Time: 1.0 Minute
Instantaneous Capacity: 100 Sq. Ft/Min.
Max Load Area: 200 Sq. Ft
Average Capacity: 67 Sq. Ft/Min.
Designed Film Thickness: 25 Microns (1.0 Mil)
Designed Paint Efficiency: 2.5 A-MIN/Sq. Ft.-Mil
SST System Footprint as built: Est. 125’-0” Long x 60’ wide x 15’-0” high (+ fans)
Load/Unload Footprint as built: Add 130’ long x 25’ wide. May be reconfigured.
Year: 2012/2013. In operation through 2022
System is available immediately. Don’t wait 1.5-2 Years for a new one.
15-Stage Stainless Steel Pretreatment System
- (S1) Immersion Clean, 160° F Max, Pump Agitation, 1,120 Gallons, 304 SS
- (S2) Immersion Clean, 160° F Max, Pump Agitation, 1,120 Gallons, 304 SS
- (S3) Immersion Rinse, Ambient, Mixer Agitation, 980 Gallons, 304 SS
- (S4) Immersion Rinse, Ambient, Mixer Agitation, 940 Gallons, 304 SS
- (S5) Immersion Acid Pickle, 140° F Max, Pump Agitation, 1,835 Gallons, Polypropylene
- (S6) Immersion Acid Pickle, 140° F Max, Stages 5 & 6 are a common tank
- (S7) Immersion Neutralizing Rinse, Ambient, Mixer Agitation, 890 Gallons, 304 SS
- (S8) Immersion Rinse, Ambient, Mixer Agitation, 1,000 Gallons, 304 SS
- (S9) Immersion Conditioner Rinse, Ambient, Mixer Agitation, 960 Gallons, 304 SS
- (S10) Immersion Zinc Phosphate, 140° F Max, Pump Agitation, 1,130 Gallons, 304 SS
- (S11) Immersion Rinse, Ambient, Mixer Agitation, 980 Gallons, 304 SS
- (S12) Immersion Rinse, Ambient, Mixer Agitation, 1,000 Gallons, 304 SS
- (S13) Immersion Sealer / Rinse, Ambient, Mixer Agitation, 930 Gallons, 304 SS
- (S14) Immersion R.O. Rinse, Ambient, Mixer Agitation, 1,000 Gallons, 304 SS
- (S15) Immersion R.O. Rinse, Ambient, Mixer Agitation, 970 Gallons, 304 SS
4-Stage Stainless Steel E-Coat System
- (S16) Imm. Cathodic E-Coat, 95° F Max, Pump Agitation, 1,300 Gallons, 304 SS
- (S17) Immersion Post Rinse 1, Ambient, Mixer Agitation, 880 Gallons, 304 SS
- (S18) Spray Post Rinse 2, Ambient, Pump Spray, 290 Gallons, 304 SS
- (S19) Immersion Post Rinse 3, Ambient, Mixer Agitation, 960 Gallons, 304 SS
Pretreatment & E-Coat Components
- Gusher Pumps & TTX Mixer Agitation provided for Tank Circulation
- Bag Filtration on Stages 1, 2, & 16
- Oberlin Filter on Stage 10
- Vanaire Fume Scrubber over Stages 5/6 Fume Scrubber on Acid Stage
- Rite 300WG Hot Water Heater with Transfer Pump
- SS Plate & Frame Heat Exchangers for Heated Stages
- Heat Exchanger Clean In Place Cart with Transfer Pump
- Carrier AquaSnap 20 Ton Chiller with Transfer Pump
- TTX Reverse Osmosis Water System
- 400 Volt, 250 Amp Controlled Power Rectifier, Water Cooled
- Anode Flush System
- Ultrafiltration System with CIP
- E-Coat Storage Tank with Filtration and Transfer Pump
- Service Decks on Rear Side of Tanks with Plastic Housing Covers
20 GPM TTX Waste Water Treatment System
- (1) Lot Storage Tanks
- (1) Stainless Steel Clarifier
- (1) Lot Diaphragm Pumps
- (1) Lot Chemical Feed Pumps, Mixers And Metering Equipment
- (1) Flow Thru Filter Press (4 Ft’ Exp to 6 Ft’)
- (1) Batch Filter Press (1 Ft’ Exp to 4 Ft’)
- System Control Panels
Convection E-Coat Dehydration, Cure Oven & Cooling Tunnel
- Dehydration Oven: 5-Position, 15 Minutes @ <250℉ Design, 1.5 Mil. BTU/Hr
- Cure Oven: 15-Position, 45 Minutes @ <450℉ Design, 2.0 Mil. BTU/Hr
- Cool Tunnel: 6-Positions, 18 Minutes
- Natural Gas, Direct-Fired and Recirculating Design
- Elevated Oven that is Side Mounted to the SST System.
- (2) ea Bottom Mounted Burner Box(s)
- (1) Air Force One High Velocity Blow Off System
- (2) Oven Air Seals
- (1) Oven Exhaust Fan
SST Transfer System
- TTX SST Transfer System Over Immersion System – Hydraulic
- Enclosed/3” Power and Free Conveyor Hand Off System for Load/Unload
- Includes all Load Bars / Carriers, Lubrication System and Related Items
- (22) Carriers Supplied
- (2) Free Standing Hoist Systems
SST Control System
All System Controls provided.
Price – $950,000 Removed and Loaded on Customer’s Trucks. Removal is starting in July, 2023
Installation services are available and may be quoted per customer request.
Contact Nick @ 920-361-5208 x 2 or nick@amerianindustrialsystems.com for more info or questions