P-265: 6-Stage Milbanks / Nordson Powder Coating System Design: 6’-0” W x 7’-0” H Opening, 8.8 FPM

P-265: 6-Stage Milbanks / Nordson Powder Coating System

Design: 6’-0” W x 7’-0” H Opening, 8.8 FPM

 

System Overview:

  • Opening Size: 6’-0” wide x 8’-0” high, can be modified
  • Part Size: 5’-0” wide x 7’-0” high x 9’-6” long as configured
  • Line Speed: 8 fpm (Variable 1-10 fpm), <1,200 lbs capacity, can be increased
  • System was installed new in 2001 and very well maintained
  • Excellent system that can be reconfigured as needed to suit your requirements
  • Location – Greeneville, TN
  • Item Listed on 09/07/2021

 

Shotblast System is Available for a Separate Purchase

 

  • 6-Stage Stainless Steel Pretreatment Washer System
    • 131’-0” long x 11’-6” wide x 16’-4” high housing
    • Gusher Vertical Mount Pumps, SS Wetted
    • Quick disconnect risers & quick-change nozzles
    • Maxon Burners on stage 2 & 4
    • All Stainless Construction
    • Exhaust Fans – Entrance and Exit
    • Independent Control Panel
    • Wash Stages
      • Stage 1 –   30 Sec.  Shot Rinse
      • Stage 2 –   60 Sec.  Alkaline Cleaner, Heated
      • Stage 3 –   30 Sec.  Rinse
      • Stage 4 –   60 Sec.  Iron Phosphate, Heated
      • Stage 5 –   30 Sec.  Rinse
      • Stage 6 –   30 Sec.  Seal

 

  • Dry-Off & Cure Ovens – Convection Heat
  • Dry Off Specs
  • Dry-Off Oven Dimensions: 8’-6” wide x 104’-0” long x 17’-2” high, 23’-2” to BB
  • Time Cycle (Dry-Off): 10 minutes @ 8.8 FPM @ <350° F

 

  • Cure Specs
  • Cure Oven Dimensions: 33’-0” wide x 110’-6” long x 17’-0” high, 23’-2” to BB
  • Time Cycle (Cure): 30 minutes @ 8.8 FPM @ <425° F

 

  • 6” Insulated Oven Panels on Roof and Walls, 4” Floor panels.
  • (1 ea) Top-Mount Burner Boxes & Duct for Dry-Off Oven
  • (3 ea) Top-Mount Burner Boxes & Duct for Cure Oven
  • All Structure, Flashing, and Duct Provided
  • Maxon Burners & Honeywell Controls on Both Ovens
  • Air Seals and Air Hoods for each Oven
  • 10-Minute Heat Dissipation (Cool Down) Tunnel After Dry-Off Oven
  • Oven Exhaust Fans for each oven.
  • Oven can be configured to new design as needed

 

  • Conveyor
    • Uni / 3” Power and Free Conveyor System
    • All Loadbars, Switches, Turns, Etc Included
    • Conveyor drives w/ variable speed control
    • Chain Tensioners, Auto Take-up
    • Auto lubrication system
    • Conveyor Supports

 

  • Nordson Powder Booth Systems
    • 2 EA – Excel 2003 Powder Booth System:
      • Auto/Manual, Side-Draft Reclaim with (18 ea) Versa Spray Auto Guns with Sure Coat Controls, (2 ea) Encore Manual Guns, Reciprocating Gun Movers, In/Out Positioning, Fire Control Panels and related equipment.

 

  • 1 EA – Excel 2003 Powder Booth System:
    • Manual Spray to Waste, Side-Draft with (2 ea) Encore Manual Guns, Control Panels and related equipment.

 

  • 1 EA – Nordson Colormax Automatic Cyclone Side Draft Powder System:
    • (18 ea) Sure Coat Auto Guns with Sure Coat Controls, Paint Feed Center, Reciprocating Gun Movers, In/Out Positioning, Fire Control Panels and related

 

  • Powder Coat Clean / EV Room
    • 52’ wide x 138’ long x 20’-0” high
    • 3” White, Insulated Panels
    • (2 ea) Access Doors & (1 ea) Overhead Door
    • (2 ea) HVAC System Included
    • Floor Mounted Support Structure

 

  • Control System
    • PLC control system with HMI.
    • All prints, programs, etc are included.

 

The system may be modified to suit your needs. Installation & Removal  services are available and may be quoted per customer request.