P-279: 3-Stage AIS / Wagner Powder Coating System Design: 3’-0” W x 6’-6” H Opening, 6 FPM

P-279: 3-Stage AIS / Wagner Powder Coating System

Design: 3’-0” W x 6’-6” H Opening, 6 FPM

 

System Overview:

  • Opening Size: 3’-0” wide x 6’-6” high
  • Part Size: 2’-0” wide x 5’-6” high x 6’-0” long, may be modified
  • Line Speed: 6 fpm (Variable), <200 lbs capacity, can be increased
  • System was installed in 2017 as a new/refurbished system and shut down in 2023.
  • Location – WI
  • Item Listed on 07/21/2024

 

3-Stage Stainless Steel Pretreatment Washer System

  • Additional Stages if required may be quoted by AIS.
  • Washer was fully refurbished and installed in 2017
  • 39’-0” long x 7’-10” wide x 12’-0” high with conveyor, 10’-8” shipping height
  • Gusher Vertical Mount Pumps, Iron Construction
  • Quick disconnect risers & quick-change nozzles,
  • Maxon 0 MBTU/HR, 6” Tube-O-Therm Burner on stage 1
  • 3,500 CFM Exhaust Fans – Entrance and Exit
  • Wash Stages @ 6 FPM
    • Stage 1 –   90 Sec.  Heated Cleaner/Phos
    • Stage 2 –   30 Sec.  Rinse
    • Stage 3 –   30 Sec.  Seal

 

Dry-Off Oven

  • Dimensions:             5’-8” wide x 30’-8” long x 11’-10” high, 16’-6” h with BB
  • Time Cycle:             5 minutes @ 6 FPM, Temp < 350℉
  • Heating Medium: Recirculating, direct gas fired
  • Top-Mount Burner Box, Ceiling Mount Duct, Air Seals off Recirc Duct
  • 1,000,000 Btu Capacity Burner & Honeywell Controls
  • 1,000 CFM Exhaust Fan, 4” Thick Panels, Ships in (1) Main section + components

 

Cure Oven

  • Dimensions:             18’08” wide x 36’-0” long x 12’-0” high,
  • Time Cycle:             21 minutes @ 5 FPM, Temp <425℉
  • Heating Medium: Recirculating, direct gas fired
  • Floor-Mount Burner Box, Floor Mount Duct, Powered Air Seal
  • 2,000,000 Btu Capacity Burner & Honeywell Controls
  • 2,000 CFM Exhaust Fan, 6” Thick Panels, Ships knocked down

 

Conveyor – Unibilt Enclosed Track

  • 100 lb Single Hang Point Capacity
  • 440 feet of Unibilt Conveyor
  • H-Attachments spaced 24” On Center
  • Conveyor drive w/ variable speed control
  • Chain Tensioner, Auto Take-up
  • Auto lubrication system
  • Floor Mount Supports

 

Wagner Reclaim Powder Auto/Manual Booth System

Type of System:           Cartridge, Side-Draft, Reclaim or STW Powder Booth

  • Dimensions: 28′ L X 16′ W X 11’-4” H (Estimated)
  • Poly Housing with Clear Poly Roof
  • (2) Automatic Gun Openings
  • (2) Manual Gun Spray Openings
  • (1) Fan Package
  • (3) Cartridge Collectors
  • (1) Lot Transfer Pump Kits
  • (3) Fluidizing Powder Hoppers
  • (1) Versa Spray Automatic Gun Controller
  • (14) Versa Spray II Automatic Powder Guns
  • (1) Encore Manual Powder Gun with Controller
  • (1) Lot Powder Pumps
  • (2) Stationary Gun Stands with Gun Mounts
  • (1) Fire Detection System
  • (1) Lot System Control Panels

 

Equipment Price:                                 $250,000 as-is with removal by customer.

Removal and Loading on trucks:        Quoted upon Request

 

Removal & Installation services are available and may be quoted per customer request. Some pics of the boothAdditional pictures are shown from when the system was installed. They do not represent current condition, but are a representation of what the line can look like when refurbished once more upon install.

 

Contact Nick @ 920-361-5208 x 2 or nick@americanindustrialsystems.com for more info or question